Page 1562 - Foton Workshop Manual - Aumark (BJ1099)

51-22 WINDOWS AND REARVIEW MIRRORS - FRONT WINDSCREEN

9. Install the front windscreen assembly
(a). Apply black polyurethane glass sealant on
the specified area with sealant gun.
NOTICE:
Don't apply too much glass sealant. If apply the
sealant on the non-specified area by accident,
remove it with cloth before it's dried.

(b). Install the front windscreen assembly.
•Mount the windscreen assembly with
sucker in place as illustrated.
•Check and confirm the contact surface of
the windscreen edge is flat.
•Align the mark on the windscreen with
the body.
(c). Install the front windscreen assembly.
• Before installation, remove the adhesive
sheet on the windscreen interior trim
sealant.
• Mount the front windscreen with sucker
as marked and gently press the edge.
• Gently press the front surface of the front
windscreen to ensure close attachment.
• If necessary, adjust the level or position
of sealant application with scraper.
• Hold the front windscreen with tape until
the applied sealant is dried.
NOTICE:
Remove the tape after at least 4 hours. Check and confirm the front windscreen stop
block is installed in the body in place. Check the clearance between the body and the front
windscreen.

Page 1562