Page 1876 - Foton Workshop Manual - Aumark (BJ1099)

61-86 CIRCUIT - SYSTEM SCHEMATIC DIAGRAM

of the electric rear view mirror switch to the pin 4 of the right rear view mirror, and after
passing through the motor, is output from the pin 5 of the right rear view mirror to the pin 8
of the electric rear view mirror switch, and then earthed from the pin 2 of the electric rear
view mirror switch to fulfill the right adjustment of the right rear view mirror.
Folding of electric rearview mirror
With the electric rearview mirror folding switch pressed, the pins 1 and 6 of the electric
rearview mirror connector will be earthed, and the pin 2 will output a signal to the pin D27
of the BCM connector C57, and BCM will actuate the electric rearview mirror to fold or
unfold.

：Parts Location

No. Reference harness No. Reference harness

C05 Front wall instrument wiring harness G03 Right front door wiring harness

C62 Front wall instrument wiring harness J03 Left front door wiring harness
C54 Front wall instrument wiring harness J08 Left front door wiring harness
C57 Front wall instrument wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

Front wall instrument wiring harness and driver door wiring harness (Beneath
C401 J201
left A pillar)
Front wall instrument wiring harness and driver door wiring harness (Beneath
C402 J202
left A pillar)

Front wall instrument wiring harness and passenger door wiring harness
C501 G201
(Beneath right A pillar)
Front wall instrument wiring harness and passenger door wiring harness
C502 G202
(Beneath right A pillar)

：Ground

No. Ground position
C02 Left A pillar

Page 1876