Page 1881 - Foton Workshop Manual - Aumark (BJ1099)

CIRCUIT - SYSTEM SCHEMATIC DIAGRAM 61-91

System description:
The battery current is output from the fuse F2 in the engine compartment fuse box to the
pin 3 of the instrument cluster via the fuse F7 in the internal fuse box, to supply electric
power to the instrument cluster. 61
With the ignition switch located at ON/ST, the current is output from the fuse F26 in the
internal fuse box to the pin 1 of the instrument cluster to supply the ignition signal.
Fuel level indicator lamp
The current is output from the pin 13 of the instrument cluster to the pin 2 of the fuel level
sensor, and then from the pin 1 of the fuel level sensor to the pin 14 of the instrument
cluster to detect the fuel level.
Charging indicator lamp
The current is output from the pin 17 of the instrument cluster to the pin 1 of the generator
to check whether the generator is working normally.
Safety belt indicator lamp
The current is output from the pins 5 and 6 of the instrument cluster to the pin 1 of the
safety belt warning switch, and earthed via the pin 2 of the safety belt alarm switch to
check whether the safety belt is being used.
Safety airbag indicator lamp
The current is output from the safety airbag control module pin CAN network to the pins 15
and 16 of the instrument cluster to activate the safety airbag indicator lamp.
Brake warning indicator lamp
The current is output from the pin 29 of the instrument cluster to the pin 1 of the hand
brake switch and earthed through itself to check whether the hand brake is working. The
current is output from the pin 8 of the instrument cluster to the pin 1 of the brake liquid
sensor and earthed via the pin 2 of the brake liquid sensor to check whether the brake
liquid level is normal.

：Parts Location

No. Reference harness No. Reference harness

A17 Engine compartment wiring harness C60 Front wall instrument wiring harness

A18 Engine compartment wiring harness C61 Front wall instrument wiring harness
A39 Engine compartment wiring harness D07 Floor wiring harness
B01 Frame wiring harness D10 Floor wiring harness

C23 Front wall instrument wiring harness D20 Floor wiring harness

C57 Front wall instrument wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

B201 D301 Floor wiring harness and frame wiring harness (Beneath the driver seat)

Page 1881