Page 1891 - Foton Workshop Manual - Aumark (BJ1099)

CIRCUIT - SYSTEM SCHEMATIC DIAGRAM 61-101

System description:
The battery current is output from the F2 fuse in the engine compartment fuse box to the
pin C5 of the body control module connector C56 through the fuse F6 in the internal fuse
box, to supply electric power to the lamplet. Under the control of the body control module, 61
the current is output from the pin A5 of the connector C54 to the switch or control module
illumination lamp terminal, and earthed via another terminal of the switch or the control
module to illuminate the backlight.

：Parts Location

No. Reference harness No. Reference harness

A40 Engine compartment wiring harness C16 Front wall instrument wiring harness

C05 Front wall instrument wiring harness C54 Front wall instrument wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

Front wall instrument wiring harness and engine compartment wiring harness
A306 C206
(Left side of instrument cross member)
Front wall instrument wiring harness and floor wiring harness (Beneath right A
C305 D205
pillar)

Front wall instrument wiring harness and left front door wiring harness (Beneath
C402 J202
left A pillar)
Front wall instrument wiring harness and left front door wiring harness (Beneath
C501 G201
right A pillar)

D401 I201 Floor wiring harness and left rear door wiring harness (Beneath left B pillar)
D501 H201 Floor wiring harness and right rear door wiring harness (Beneath right B pillar)

：Ground

No. Ground position
C01 Left A pillar

Page 1891