Page 1933 - Foton Workshop Manual - Aumark (BJ1099)

CIRCUIT - SYSTEM SCHEMATIC DIAGRAM 61-143

System description:
The battery current is output to the fuse F9 in the internal fuse box through the fuse F2 in
the engine compartment fuse box, and then to the pin 13 of the PEPS controller C71 to
supply battery power to the PEPS controller. 61
The current is output from the fuse F22 in the internal fuse box to the pin 31 of the PEPS
controller C71 through the fuse F22 in the internal fuse box, to supply ACC power to the
PEPS controller.
The current is output from the fuse F26 in the internal fuse box to the pin 30 of the PEPS
controller C71, to supply ACC power to the PEPS controller.

：Parts Location

No. Reference harness No. Reference harness

A40 Engine compartment wiring harness C05 Front wall instrument wiring harness

C71 Front wall instrument wiring harness C72 Front wall instrument wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

Front wall instrument wiring harness and floor wiring harness (Beneath left A
C303 D203
pillar)
Engine compartment wiring harness and front wall instrument wiring harness (Left
A306 C206
side of instrument cross member)

D301 B201 Floor wiring harness and frame wiring harness (Beneath the driver seat)
Frame wiring harness and rear bumper wiring harness (Inside the rear bumper,
B301 N201
beneath the frame)

Front wall instrument wiring harness and driver door wiring harness (Beneath
C401 J201
left A pillar)
Front wall instrument wiring harness and passenger door wiring harness
C501 G201
(Beneath right A pillar)

：Ground

No. Ground position
C22 Left side of instrument cluster

Page 1933