Page 1928 - Foton Workshop Manual - Aumark (BJ1099)
P. 1928
61-138 CIRCUIT - SYSTEM SCHEMATIC DIAGRAM
System description:
The battery current is output to the fuse F7 in the internal fuse box through the fuse F2 in
the engine compartment fuse box, and then to the pin 1 of the engine immobilizer controller
C12 to supply the battery power to the engine immobilizer controller. The current is output
to the pin 4 of the engine immobilizer controller C12 through the fuse F26 in the internal
fuse box to supply ignition power to the engine immobilizer controller.
：Parts Location
No. Reference harness No. Reference harness
C05 Front wall instrument wiring harness C12 Front wall instrument wiring harness
C11 Front wall instrument wiring harness C14 Front wall instrument wiring harness
：Connectors Among The Harness
No. No. Reference harness(Connector location)
Front wall instrument wiring harness and engine compartment wiring harness
C206 A306
(Left side of instrument cross member)
：Ground
No. Ground position
C22 Left side of instrument cross member
Page 1928
