Page 1926 - Foton Workshop Manual - Aumark (BJ1099)

61-136 CIRCUIT - SYSTEM SCHEMATIC DIAGRAM

System description:
The current is output from the fuse F2 in the engine compartment fuse box to the pin C5 of
the BCM connector C56 through the fuse F6 in the internal fuse box; when the engine is
started and before the headlamp is turned on, the day running lamp will be activated. The
day running lamp power is output to the No. 1 terminal of the day running lamp through the
pin C11 of the BCM connector C56, and then output from the No.2 terminal to activate the
day running lamp.

：Parts Location

No. Reference harness No. Reference harness

C05 Front wall instrument wiring harness A43 Engine compartment wiring harness

C56 Front wall instrument wiring harness A44 Engine compartment wiring harness
A40 Engine compartment wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

Front wall instrument wiring harness and engine compartment wiring harness
C206 A306
(Left side of instrument cross member)

Front wall instrument wiring harness and engine compartment wiring harness
C201 A301
(Left side of instrument cross member)

：Ground

No. Ground position No. Ground position

Beside the right grouped headlamp of Beside the left grouped headlamp of
A07 A25
the engine compartment the engine compartment

Page 1926