Page 1924 - Foton Workshop Manual - Aumark (BJ1099)

61-134 CIRCUIT - SYSTEM SCHEMATIC DIAGRAM

System description:
With the ignition switch turned on, after the sunroof opening button is pressed, the current
is output to the No.4 terminal of the sunroof switch of the front cabin lamp assembly, and
then from the No.5 terminal to the No. 1 terminal of the sunroof assembly. At this moment,
the power of sunroof assembly is output from the fuses F28 and F11 of the engine
compartment fuse box to the fuse F12 in the internal fuse box, and then to the sunroof
assembly motor, and meanwhile, the No. 4 terminal of the sunroof assembly is earthed to
open the sunroof.

：Parts Location

No. Reference harness No. Reference harness

A40 Engine compartment wiring harness C05 Front wall instrument wiring harness

F01 Roof harness C57 Front wall instrument wiring harness

：Connectors Among The Harness

No. No. Reference harness(Connector location)

Front wall instrument wiring harness and engine compartment wiring harness
C206 A306
(Left side of instrument cross member)
C601 F201 Front wall instrument wiring harness and roof harness (Above left A pillar)

：Ground

No. Ground position
C01 Left A pillar

Page 1924