Page 2158 - Foton Workshop Manual - Aumark (BJ1099)

62-106 DIAGNOSIS-POWER REARVIEW MIRRORS

Is the result normal?
Yes >Replace fuse.
No >Repair or replace the harness.

3. Check harness and connector (Electric rearview mirror switch-grounding)

(a). Ignition switch:"LOCK".
(b). The electric rearview mirror switch connector J08.

(c). Measure the resistance according to values
in the table below.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
J08(2) - Grounding ＜ 2 Ω

Is the result normal?
Yes>To step 4.
No >Repair or replace the harness.

4. Check harness and connector (Electric rearview mirror switch-Electric rearview unit)

(a). Ignition switch:"LOCK".
(b). Disconnect the electric rearview mirror switch connector J08.

(c). Measure the resistance according to values
in the table below.
OFF T.S
J08 J 30 Standard resistance: (check whether there
G30
is an open circuit)
4 3 2 1
8 7 6 5 3 2 1 8 7 6 5
Connect the pin by
3 4 Standard value
multimeter
Ω
J08(3) - J03(4) ＜ 2 Ω
fuwx62416
J08(3) - G03(4) ＜ 2 Ω
Is the result normal?
Yes>To step5.
No >Repair or replace the harness.

Page 2158