Page 2171 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-POWER REARVIEW MIRRORS 62-119

3. Check the folding motor short circuit

(a). Ignition switch:"LOCK".
(b). Disconnect the folded left and right rear view mirror motor connectors C03, G03.

(c). Measure the resistance according to values 62
in the table below.
Standard resistance: (check whether there
is a short circuit)

Connect the pin by Standard value
multimeter
J03(7) - G03(7)
＜ 2 Ω
J03(8) - G03(8)

Is the result normal?
Yes>To step 4.
No >repair or replacement folding motor short circuit wiring harness.

4. Check the connectors and wiring harness (folding machine - BCM)

(a). Ignition switch:"LOCK".
(b). Disconnect body controller connector C54.
(c). Disconnect the folded left and right rear view mirror motor connectors J03, G03.

(d). Measure the resistance according to values
in the table below.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

J03(8) - C54 (A11)
＜ 2 Ω
J03(7) - C54 (A12)

G03(8) - C54 (A11)
＜ 2 Ω
G03(7) - C54 (A12)

Is the result normal?
Yes>change folding motor.
No >Repair or replace the harness.

Page 2171