Page 839 - Foton Workshop Manual - Aumark (BJ1099)

IGNITION - SPARK PLUG 19B-9
REPLACEMENT

1. Remove the spark plug
(a). Turn off the ignition switch, disconnect the negative cable of battery.
(b). Use compressed air to clean the surrounding area of the ignition coil.
(c). Remove the ignition coil.(Refer to "Chapter 19 Ignition - Spark Plug, Replacement")

(d). Loosen the spark plug with the spark plug
installation/removal socket.

fuwx19B013
19B
(e). Attach the ignition coil removed onto the
head of spark plug and rotate to remove
the spark plug.
NOTICE:
• Do not knock the spark plug, especially the
electrodes.
• After the removal of spark plug, it’s
recommended to seal the mounting hole of
spark plug, in order to prevent the ingress of
foreign material into the cylinder.
• The removal method is same for the spark plugs
of all cylinders.

fuwx19B014

Page 839