Page 853 - Foton Workshop Manual - Aumark (BJ1099)

TRANSMISSION - TRANSMISSION ASSEMBLY 21A-11

DANGER:
• Support the transmission with a jack and take necessary protective measures.
• Keep the transmission as level as possible, in order to ease the installation.
• Apply a slight amount of lubricating grease on the 1st shaft spline to ease the installation.
(b). Tighten the retaining bolts of the transmission.
Torque:30~42N•m

(c). Install the body bracket.
(d). Tighten the retaining bolts of the body bracket.
Torque:21~25N•m

(e). Tighten the bolts connecting the gearbox
and the body bracket.
Torque:46~56N•m

21A

11. Install the transfer case assembly (Refer to
"Chapter 23 Transfer Case - Transfer Case ,
Replacement")
NOTICE:
While installing the fastening bolts of transfer
case, connect the grounding wires of transfer
case and body.

12. Install the transmission shaft (Refer to "Chapter 34. Axle & Transmission Shaft -
Transmission Shaft Assembly, Overhaul")
13. Install the clutch cylinder (Refer to "Chapter 42 Clutch- Clutch Cylinder, Overhaul")
14. Install the transmission shifting system (Refer to "Chapter 21. Transmission -
Transmission Shifting System, Replacement")

Page 853