Page 861 - Foton Workshop Manual - Aumark (BJ1099)

TRANSMISSION - TRANSMISSION ASSEMBLY 21A-19

8. Install the extension housing
NOTICE:
• Before installation, clean the impurities and dirt
on the housing interface.
• During installation, apply Loctite 518 sealant
evenly on the extension housing interface.
(a). Tighten the retaining bolts.
Torque:30~42N•m
NOTICE:
During installation, align the gearshift gear with
the gearshift fork and install.

(b). Install the gear shift retaining pin with a tool.

21A

9. Install the front housing assembly
(a). Install the clip ring to the first shaft bearing.
(b). Install the first shaft bearing and the clip
ring assembly.

(c). Install the front housing.
NOTICE:
• Before installation, clean the impurities and dirt
on the housing interface.
• During installation, apply Loctite 518 sealant
evenly on the housing interface.
(d). Tighten the front housing retaining bolts.
Torque:30~42N•m

Page 861