Page 862 - Foton Workshop Manual - Aumark (BJ1099)

21A-20 TRANSMISSION - TRANSMISSION ASSEMBLY

(e). Tighten the shift fork dowel bolt.
Torque:38~49N•m

(f). Install the front bearing snap ring.

10. Install the front bearing cap
(a). Install the front shaft oil seal.
NOTICE:
Before the installation, pay attention to the
orientation of oil seal.

(b). Tighten the retaining bolts.
Torque:7~11N•m
NOTICE:
• Before installation, clean the impurities and dirt
on the housing interface.
• During installation, apply Loctite 518 sealant
evenly on the front bearing cap interface.

Page 862