Page 893 - Foton Workshop Manual - Aumark (BJ1099)
P. 893

TRANSMISSION - TRANSMISSION ASSEMBLY                            21B-7
                 REPLACEMENT



                     NOTICE:
                 Caution:  The transmissions of 4WDand 2WD vehicles are replaced in the same way.
                 Below the introduction is made by taking the 2WD vehicles as the example, and difference
                 with the 4WD vehicles will be given.


                 1.     Park the vehicle on a level ground, apply the parking brake, and engage the “P”
                        gear.
                 2.     Disconnect the battery negative cable (refer to “Chapter 18 Starting and charging -
                        Replacement, battery”).
                 3.      Raise the vehicle.


                                                            4.     Screw out the transmission bottom drain
                                                                   plug and discharge the transmission
                                                                   lubricating oil.
                                                                NOTICE:
                                                            • Before discharge, make sure that the vent plug
                                                              is unostructed.
                                                            •When discharging the transmission lubricating
                                                              oil,  use  a  dedicated  vessel  to  receive  the
                                                              transmission lubricating oil, and dispose it as
                                                              required.                                             21B
                                                fuwx21B008
                                                            •After  the  transmission  lubricating  oil  is
                                                              discharged,  refit  the  drain  plug,  and  avoid
                                                              forgetting this.
                                                               Torque:12 N•m


                 5.     Remove the transfer case assembly (refer to “Chapter 23 Transfer case -
                        Replacement, transfer case).


                                                            6.     Remove the transmission assembly.
                                                             (a).   Screw out the connecting bolt between the
                                                                   rear propeller shaft universal joint and the
                                                                   transmission flange plate assembly.











                                                fuwx21B009








                                                                                                      Page 893
   888   889   890   891   892   893   894   895   896   897   898