Page 927 - Foton Workshop Manual - Aumark (BJ1099)

TRANSFER CASE - TRANSFER CASE 23-5
REPLACEMENT

1. During disassembly, the gearbox shall be engaged in neutral position and the
transfer case in 2H position
2. Turn off the ignition switch
3. Remove the front transmission shaft the rear transmission shaft (Refer To "Chapter
34 Axle & Transmission Shaft - Transmission Shaft, Replacement")

4. Drain the transfer case oil
(a). Unscrew the drain bolt and drain the
transfer case oil.
NOTICE:
Install the transfer case oil drainage plug after the
drainage of transfer case lubricating oil.
Torque:19~30N•m

5. Remove other accessories of the transfer
case
(a). Disconnect the gear shift motor connector.
(b). Disconnect the transfer case harness.

23

6. Remove the transfer case assembly
(a). Screw off the transfer case vent hose fixing
bolt.

fuwx23047

Page 927