Page 930 - Foton Workshop Manual - Aumark (BJ1099)

23-8 TRANSFER CASE - TRANSFER CASE

(f). Refit the transfer case vent hose fixing bolt.
Torque:41~51N•m

fuwx23047

8. Install other accessories of the transfer
case
(a). Connect the transfer case harness.
(b). Connect the gear shift motor connector.

9. Fill up the transfer case oil
(a). Unscrew the drain bolt and fill up the
transfer case oil.
Required transfer case lubricant:
Dexron III, XT-2-QDX (Ford ESP-M2C138-
CJ) or equivalent.
Filling volume:1.2L
NOTICE:
• Don't mix the transfer case oil of different
brands.
• When checking the oil level, ensure the vehicle
is level and the oil level is no lower than 5mm
from the bottom of the filler plug.
(b). Install the transfer case oil filler plug.
Torque:19~30N•m

10. Install the front transmission shaft and the rear transmission shaft (Refer to"Chapter
34 Axle & Transmission Shaft - Transmission Shaft, Replacement")

Page 930