Page 969 - Foton Workshop Manual - Aumark (BJ1099)

FRONT SUSPENSION - FRONT WHEEL ALIGNMENT 31-9

7. Adjust front wheel hub
(a). Turn the steering wheel from the left
extreme position to the right extreme
poistion, and then from the right to the left.
Record the total number of rounds after
such rotation.
(b). Turn the steering wheel to the 1/2 of the
total rounds, when the steering arm shall
be in the central vertical position and the
two front wheels shall be in the position of
driving forward.
(c). Release the shield clamp.
(d). Unscrew the locking nut of the horizontal
steering rod.

(e). Adjust the wheel front hub by changing the
steering tie rod. Shortern the tie rod to
increase the positive front hub and extend
the tie rod to increase the negative front
hub. 31
(f). When adjusting the front hub, change the
tie rods on both sides simultaneously, in
the same direction and to the same extent.

(g). After the adjustment, tighten the locking
nut of the horizontal steering rod.
Torque: 81~99 N•m
(h). Install the shield clamp.

Page 969