Page 1001 - Foton Workshop Manual - Tunland (AT)
P. 1001

DIAGNOSTICS - LIGHTING SYSTEM                            04-855

                 Check whether the result is normal?

                 Yes> go to step 8
                 No > Maintenance or replace harness.

                 8 .    Check the combination switch (lamplight switchover)
                 (a)    Ignition Switch: OFF.                                                                        04


                                                           (b)    Disconnect the connector C008 of
                                                                  combination switch (lamplight switchover).














                                                 ftwx641019


                                                           (c)    Check the combination switch (lamplight
                                                                  switchover)
                                                                  Standard voltage

                                                                                Connecting
                                                                                                   Specified
                                                              Conditions          pins of
                                                                                                     value
                                                                                multimeter
                                                              Turn off the
                                                             passing lamp          11-12            ≥ 1 MΩ
                                                                 switch
                                                              Turn on the
                                                             passing lamp          11-12             < 2 Ω
                                                                 switch


                 Check whether the result is normal?

                 Yes> go to step 9
                 No > Replace the combination switch.

                 9 .    Check the harness and connectors (combination switch - ground)

                 (a)    Ignition Switch: OFF.


















                                                                                                        Page 1001
   996   997   998   999   1000   1001   1002   1003   1004   1005   1006