Page 1011 - Foton Workshop Manual - Tunland (AT)
P. 1011

DIAGNOSTICS - LIGHTING SYSTEM                            04-865

                                                           (b)    Disconnect the connector C008 of
                                                                  combination switch (lamplight switchover).







                                                                                                                     04





                                                 ftwx641019

                                                           (c)    Disconnect the connector C036 of BCM
                                                                  control unit.














                                                 ftwxd041026

                                                           (d)    Measure the electrical resistance based on
                                                                  the value in the following form.

                                                                  Standard electrical resistance (check
                                                                  whether there existent an open circuit)
                                                            Multimeter connection          Standard value


                         C036                               C036（E9）-C008（8）                    ＜ 2 Ω





                                  C008










                                                 ftwxd041397


                 Check whether the result is normal?
                 Yes> Replace BCM control unit.

                 No > Maintenance or replace harness.








                                                                                                        Page 1011
   1006   1007   1008   1009   1010   1011   1012   1013   1014   1015   1016