Page 1467 - Foton Workshop Manual - Tunland (AT)
P. 1467
ENGINE MECHANICAL - FLYWHEEL, CYLINDER BLOCK & CRANKSHAFT 15-93
(d) Along diagonal a, b, check the cylinder head
flatness with a ruler and a feeler blade.
Flatness maximum: 0.010mm
NOTICE
• If the flatness exceeds the maximum,
replace the cylinder block.
15
15 . Cylinder check:
(a) Visually inspect whether there is a vertical scratch in the inner wall of the cylinder.
NOTICE
• If any, replace the cylinder.
(b) Measuring cylinder bore with a dial gage.
(c) Measure the thrust and axial bore of the
cylinder at the positions of A, B and C.
Cylinder bore:
Minimum: 93.99mm
Maximum: 94.01mm
NOTICE
• If it exceeds the maximum, replace the
cylinder block when necessary.
Page 1467