Page 536 - Foton Workshop Manual - Tunland (AT)
P. 536

04-390                     DIAGNOSTICS - ENGINE CONTROL SYSTEM

           SLOW, DULL AND IMBALANCED OF THE ACCELERATING

           REACTION

                 Fault phenomenon                  Diagnosis logic                Possible reasons

                                                                            • Injector fault
      04                                                                    • Leakage in the intake
                                                                              system
                                                                            • Low fuel pressure
                                            • Injector                      • Air filter blocked
                                            • Intake system                 • Electronic throttle fault
                                            • Fuel system                   • Block in fuel filter
            Slow, dull and imbalanced of    • Injection timing              • Incorrect injection timing
            the accelerating reaction
                                            • Electronic throttle valve     • Air fuel ratio control system
                                            • Exhaust system                  fault
                                            • ECM                           • Fuel supply system fault
                                                                            • Too low of the compression
                                                                              pressure
                                                                            • Exhaust system blocked
                                                                            • ECM fault


           Diagnosis Procedure

           1 .    Check the engine data

           (a)    Ignition switch: OFF.
           (b)    Connect the diagnosis tool with the fault diagnosis connector (16 pins) on the lower
                  left of the dashboard.
           (c)    Ignition switch: ON, and start the diagnostic tool.
           (d)    Read the motor data shown on the diagnostic tool.

           Check whether the data flow is normal or not.
           YES>To step 2.

           No >Maintenance related faults.

           2 .    Check the intake system
           (a)    Check the air intake pipe joints, gaskets, and the EGR system, fuel steam system.
           (b)    Check whether the air filter has the filter elements blocked or not.

           Is the inspection result normal?
           YES>To step 3.
           No >Clean and change the default parts.


           3 .    Check the idle speed
           (a)    Check whether the idle motion of the motor is normal or not.

           Is the inspection result normal?
           YES>To step 4.






                                                                                                         Page 536
   531   532   533   534   535   536   537   538   539   540   541