Page 713 - Foton Workshop Manual - Tunland (AT)
P. 713
DIAGNOSTICS - REVERSE RADAR SYSTEM 04-567
Yes> go to step 3.
No > Maintenance or replace harness.
3 . Check harness and connector (reverse radar probe - ground)
(a) Ignition Switch: OFF.
(b) Disconnect reverse radar probes B006、B009. 04
(d) Measure the electrical resistance between
reverse radar probesB006（4）, B009（4）
and the ground respectively.
Standard electrical resistance (check
whether there existent an open circuit)
Multimeter connection Standard value
B006（4）、B009（4） ＜2Ω
- ground
Check whether the result is normal?
Yes> go to step 4.
No > Maintenance or replace harness.
4 . Check harness and connector (reverse radar probe - body control controller)
(a) Ignition Switch: OFF.
(b) Disconnect reverse radar controller C035.
(c) Disconnect reverse radar probe B006.
(d) Measure the electrical resistance between
reverse radar controller C035（D31）and
reverse radar probe B006（1）.
Standard electrical resistance (check
whether there existent an open circuit)
Multimeter connection Standard value
C035（D31） - B006
＜2Ω
（1)
Check whether the result is normal?
Yes> go to step 5.
Page 713
