Page 842 - Foton Workshop Manual - Tunland (AT)

04-696 DIAGNOSTICS - POWER REARVIEW MIRROR

(e) Check start and cut-off relay R04
Standard resistance:

Multimeter
Conditions connection Specified
value
stitch
04
Normal
1 - 2 Breakover
situation
Apply power
supply voltage
to position 3 - 4 Cut-off
between stitch
1 and 2,

Check whether the result is normal?
Yes> go to step 5.
No>Replace relay.

5 . Check harness and connector (rearview mirror heating relay—rearview mirror
asembly)
(a) Disconnect battery negative cable.
(b) Pull out rearview mirror heating relay R01 inside fuse box of the body.

(c) Disconnect left power rearview mirror
connector J003.
(d) Disconnect right power rearview mirror
connector G002.

(e) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is short circuit)

Multimeter connection Standard value
30
J003(1）-R01(30) ＜ 2 Ω
G002(1）-R01(30) ＜ 2 Ω

ftwxd041500

Page 842