Page 902 - Foton Workshop Manual - Tunland (AT)

04-756 DIAGNOSTICS - WIPER & WASHER

(c) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)

Multimeter connection Standard value
A015
04
A015 1 (1) - Ground ＜ 2 Ω

ftwxd041381

Check whether the result is normal?
Yes> go to step 5
No > Maintenance or replace harness.

5 . Check the front washer motor.

(a) Connect the battery positive terminal (+) to
pin 2 of front washer motor connector.
(b) Connect the battery negative terminal (-) to
pin 1 of front washer motor connector.

Check whether there is fluid coming out of the front washer motor outlet.
Yes > Replace the combination switch (wiper).

No > Replace the front washer motor.

Page 902