Page 2105 - Foton Workshop Manual - Sauvana

DIAGNOSIS-POWER WINDOW 62-53

(c). Disconnect the BCM control unit connector
C57.

62

fuwx62302

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
J01(5) - C57(D32) ＜ 2 Ω

Is the inspection result normal?
Yes>To step 3.
No >Repair or replace the communication harness between No.5 pin of driver door power
window motor J01 and No. D32 of BCM control unit C57.

3. Check harness and connector (Driver door power window motor-front window fuse)

(a). Ignition switch:"LOCK".
(b). Unplug the driver door power window motor J01.

(c). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

J01(3) - F13 ＜ 2 Ω

Page 2105