Page 2110 - Foton Workshop Manual - Sauvana

62-58 DIAGNOSIS-POWER WINDOW

(c). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
F13(30A) - C55(B7) ＜ 2 Ω

Is the inspection result normal?
Yes>To step 3.
No >Repair or replace the harness.

3. Check harness and connector (Driver door control switch assembly-BCM control unit)

(a). Ignition switch:"LOCK".
(b). Unplug the driver door control switch assembly J04.。
(c). Disconnect the BCM control unit connector C57.

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

J04(8) - C57(D12) ＜ 2 Ω

Is the inspection result normal?
Yes>To step4.
No >Repair or replace the harness.

4. Check harness and connector (Driver door control switch assembly-grounding)

(a). Ignition switch:"LOCK".
(b). Unplug the driver door control switch assembly J04.
(c). Disconnect the BCM control unit connector C57.

Page 2110