Page 2111 - Foton Workshop Manual - Sauvana

DIAGNOSIS-POWER WINDOW 62-59

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter 62
J04(11) - Grounding ＜ 2 Ω

Is the inspection result normal?
Yes>To step 5.
No >Repair or replace the harness.

5. Check harness and connector (Assistant driver door power window switch-BCM
control unit)

(a). Ignition switch:"LOCK".
(b). Unplug the assistant driver door power window switch G04.
(c). Disconnect the BCM control unit connector C57.

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

G04(3) - C57(D9) ＜ 2 Ω

Is the inspection result normal?
Yes>To step 6.
No >Repair or replace the harness.

6. Check harness and connector (Assistant driver door power window switch-
grounding)

(a). Ignition switch:"LOCK".
(b). Unplug the assistant driver door power window switch G04.
(c). Disconnect the BCM control unit connector C57.

Page 2111