Page 315 - Foton Workshop Manual - Sauvana

ENGINE MECHANICAL - ENGINE ASSEMBLY 12B-25

(b). As shown in the figure, remove the fixed
bolts of the camshaft hood, gently pry
camshaft hood, and then remove the
camshaft hood.
(c). Take off camshaft hood sealing gasket.
NOTICE:
To avoid the deformation of camshaft hood due to
the uneven stress, destroying the leakproofness,
when removing camshaft hood, firstly all screw
bolt assembly shall be unscrewed, then loosen
and take off them one by one.
12B

20. Remove the timing sprocket mechanism
(a). Remove fixed bolts on the front shroud of
the cylinder head.
(b). Use a stick to gently knock the front shroud
of the cylinder head, take down the front
shroud of the cylinder head.
NOTICE:
When removing, the contact surface of front
shroud of the cylinder head shall not be
scratched.

(c). Remove fixed bolts of the sprocket
chamber cover.
(d). Use a slot type screwdriver to evenly pry
the ① , ② and ③ position as shown in the
figure, pry and take off sprocket chamber
cover.
NOTICE:
When removing, the contact surface of front
shroud shall not be scratched.

Page 315