Page 781 - Foton Workshop Manual - Sauvana

LUBRICATION - LUBRICATING SYSTEM 17B-3
NOTIES

1. Periodically check the engine oil and as appropriate add or replace the engine oil.
2. During the work of lubricating system, it must be performed after the engine is
cooled.
3. During the work, prevent the oil from spraying on the drive belt.
4. Uniformly collect the used engine oil and always maintain clean the maintenance
site.
5. Note the following points for use of sealing gum:
• Remove the residual sealing gum thoroughly from the mounting surfaces of oil
sump and air cylinder body (including the surface grooves where the sealing gum
is applied, fastening bolts and bolt mounting holes) with a scraper.
• While using the sealant, wipe clean the surface on which the sealant is to be
applied and remove the adhered water and other foreign materials.
• If any foreign substance on the sealing gum, remove it immediately.

17

Page 781