Page 1251 - Workshop Manual - Tunland (2017)
P. 1251
ENGINE CONTROL SYSTEM - ENGINE PREHEATING SYSTEM 11-63
13 . Install the inlet heater, and tighten the 11
fixing bolts and the bolts module,
14 . Install the inlet pipe joint.
(a) Install the gasket ring onto the inlet pipe joint.
(b) Install inlet pipe joint, and tighten the fixing
bolts of the inlet pipe joint.
15 . Install the EGR connecting pipe assembly,
and tighten the fixing bolts of the EGR
connecting pipe bracket and the
connecting pipe.
