Page 1315 - Workshop Manual - Tunland (2017)
P. 1315

INTAKE AIR - AIR FILTER ASSEMBLY                            14-3

                 AIR FILTER ASSEMBLY

                 REPLACEMENT
                 1 .    Switch off all electrical units and ignition.
                 2 .    Disconnect the battery cable at negative end. (Refer to "Chapter 20. Start &
                        Charge - Battery, Replacement")
                                                                                                                     14
                                                           3 .    Disconnect the intake flow sensor
                                                                  connector.
                                                           4 .    Loose the fixing clamp, take out the air
                                                                  filter assembly vent hose.



















                                                           5 .    Remove the air filter assembly fixing bolt.
                                                           6 .    Take out the air filter assembly.

















                                                           7 .    Install the air filter assembly.
                                                           8 .    Tighten the air filter assembly fixing bolt.
                                                                  Torque: 21～25N•m
   1310   1311   1312   1313   1314   1315   1316   1317   1318   1319   1320