Page 1387 - Workshop Manual - Tunland (2017)
P. 1387
ENGINE MECHANICAL - ROCK ARM CHAMBER, ROCK ARM , ROCK ARM CUSHION BLOCK, ROCK ARM
BRACKET & CAMSHAFT 15-51
CAUTION
(a) Check whether there is unusual wear on the
bushing of the camshaft. Replace it if needed.
15
(b) Before installing the camshaft, apply
lubricating oil to the thrust at each flange on
the camshaft (the left and right sides of the
flange).
32 . Install the thrust pad, and tighten the fixing
bolts.
Torque: 10 Nm
33 . Install the gasket.
