Page 1429 - Workshop Manual - Tunland (2017)

ENGINE MECHANICAL - FLYWHEEL, FLYWHEEL HOUSING, CYLINDER BLOCK & CRANKSHAFT93
15-
(d) Along diagonal a, b, check the cylinder head
flatness with a ruler and a feeler blade.
Flatness maximum: 0.010mm

CAUTION

• If the flatness exceeds the maximum,
replace the cylinder block.
15

15 . Cylinder check:
(a) Visually inspect whether there is a vertical scratch in the inner wall of the cylinder.

CAUTION

• If any, replace the cylinder.

(b) Measuring cylinder bore with a dial gage.

(c) Measure the thrust and axial bore of the
cylinder at the positions of A, B and C.
Cylinder bore:

Minimum: 93.99mm
Maximum: 94.01mm

CAUTION

• If it exceeds the maximum, replace the
cylinder block when necessary.