Page 1569 - Workshop Manual - Tunland (2017)

FRONT SUSPENSION - FRONT WHEEL ALIGNMENT 31-11

8 . Check the front wheel hub
(a) Measure the distance D between the central
lines on two front treads of two front wheels
and the distance B between the central lines
on two rear treads of two front wheels, so that
the difference between A and D equals to the
front hub value.
Front wheel hub standard C-D/A+B:(2.2 ±
1) mm/(0.05±0.05)′

CAUTION
After the adjustment of four wheel alignment parameters, check and adjust the
maximum turning angles of the wheels RH and LH.

9 . Adjust the Maximum Turning Angles of
the Wheels RH and LH
(a) Adjust the left and right wheel turning angles
by changing the steering tie rod. If the inner 31
left turning angle is small, shorten the left tie
rod and extends the right tie rod to the same
extent, and vice versa.
(b) After adjusting the left and right wheel turning
angles, restore the front wheels to the straight
driving position, hold the steering wheel and
install the fastener.

10 . Check the Maximum Turning Angle of the
Front Wheel
A-inward turning angle: 36°

B-outward turning angle: 33°

CAUTION
The turning angles of the wheels RH and LH shall
be the same. If it doesn't meet the standard,
readjust it.