Page 1567 - Workshop Manual - Tunland (2017)

FRONT SUSPENSION - FRONT WHEEL ALIGNMENT 31-9

5 . Adjust the Wheel Camber
(a) After the adjustment of the kingpin caster,
adjust the adjusting cam module of the lower
swing arm front shaft and the lower arm rear
shaft at the same time.
(b) Rotating the same degree in the same
direction ensures that only the wheel camber
is changed while the caster remains the same.
Increase the camber by rotating them towards
the outside of the frame at the same time and
descrese it by rotating them towards the
inside of the frame simultaneously.

CAUTION
Each scale of the cam changes the caster for 7'.
Turn the adjusting cam for no more than 4.5
scales from the central line.
(c) After adjustment, tighten the retaining nuts.
Torque: 150 ~ 190N·m
31
(d) Check the front wheel camber
Front wheel camber standard: 25′±30′

6 . Kingpin Inclination
(a) After the adjustment of the kingpin caster and the wheel camber, the kingpin inclination
will be accurate, so there is no need to adjust.