Page 1563 - Workshop Manual - Tunland (2017)
P. 1563
FRONT SUSPENSION - FRONT SUSPENSION ASSEMBLY 31-5
ON-VEHICLE INSPECTION
1 . Check tire wear and pressure. (Chapter 33.Wheel & tire - wheel & tire assembly,
on-vehicle inspection)
2 . Check the radial runout of the wheel.
Radial runout standard：0.4mm
3 . Check the axial runout of the wheel.
Axial runout standard：0.25 mm
4 . Check whether the retaining bolts of the front suspension are secured.
5 . Check whether the retaining bolts of the steering mechanism are secured.
6 . Check for loose ball joints or leakage.
7 . Check whether the shock absorber is working properly.
8 . Check for aging or crack in the sleeve of the lower swing arm and replace it if
needed.
31
