Page 1651 - Workshop Manual - Tunland (2017)

AXLE AND PROPELLER SHAFT - FRONT DIFFERENTIAL ASSEMBLY 34-29

(c) Tighten the retaining bolts of the driven gear.
Thread sealant and other impurities.

CAUTION

• When removing all retaining bolts, replace
new ones.
• When installing bolts, apply two drops of
thread sealant on the thread.

16 . Install the Differential Assembly
(a) Install 2 differential bearing outer rings.

CAUTION

Install it by left/right as marked.

(b) Install the differential assembly.

34

(c) Ensure the distance between the main
reducer housing and the mounting end of the
differential bearing on the differential housing.