Page 1655 - Workshop Manual - Tunland (2017)

AXLE AND PROPELLER SHAFT - FRONT DRIVING GEAR 34-33

(b) Open the nut lock.

(c) Retighten the nut.
Torque (increase): 5N·m

Torque (max.): 245N·m

(d) Measure the driving gear startup torque with
a torque wrench again.
34
Startup torque: 0.49～0.69N·m

CAUTION

• If the startup torque is still below the limit,
replace a new driving gear bearing sleeve.
Replace the bearing if necessary. (Refer
to "Chapter 34. Axle & transmission shaft
- driving gear, overhaul")
• After replacement, recheck the startup
torque until it reaches the required range.

(e) After the startup torque reaches the required
range, lock the nut lock.