Page 1840 - Workshop Manual - Tunland (2017)

41-26 TRANSMISSION（JC538） - TRANSMISSION ASSEMBLY

9 . Install the second shaft oil seal.
(a) Install the second shaft oil seal.

10 . Install the Second Shaft Flange
(a) Tighten the fixing nuts.

Torque: 38 ~ 49N·m

11 . Install the front housing assembly.
(a) Install the first shaft bearing.
(b) Install the clip ring.

41 (c) Install the front housing.
CAUTION

• Before installation, clean the impurities
and dirt on the housing interface.
• During installation, apply Loctite 518
sealant evenly on the housing interface.

(d) Tighten the front housing fixing bolts.
Torque: 30 ~ 35N·m