Page 1841 - Workshop Manual - Tunland (2017)

TRANSMISSION（JC538） - TRANSMISSION ASSEMBLY 41-27

(e) Tighten the shift fork shaft assembly dowel
bolt.
Torque: 38 ~ 49N·m

(f) Install the shift fork dowel plug.

(f) Install the front bearing circlip .

12 . Install the front bearing cap.

(a) Install the front shaft oil seal.

41

(b) Tighten the fixing bolts.
Torque: 7.8 ~ 11.8N·m

CAUTION

• Before installation, clean the impurities
and dirt on the housing interface.
• During installation, apply Loctite 518
sealant evenly on the front bearing cap
interface.