Page 1879 - Workshop Manual - Tunland (2017)

TRANSMISSION（JC538） - TRANSFER CASE (4WD) 41-65

REPLACEMENT

1 . During disassembly, the gearbox shall be engaged in neutral position and the
transfer case in 2H position.
2 . Switch off the ignition.
3 . Remove the transmission shaft. (Refer to "Chapter 34. Axle & transmission shaft
- transmission shaft, replacement")

4 . Drain the transfer case oil.
(a) Screw out the drain bolt and drain the transfer
case oil.
Torque: 19 ~ 30N·m

5 . Remove other accessories of the transfer
case.
(a) Disconnect the odometer sensor connector.

(b) Disconnect the gear shift motor connector.
41
(c) Disconnect the electromagnetic clutch coil
connector.
(d) Loose the transfer case harness.