Page 1881 - Workshop Manual - Tunland (2017)

TRANSMISSION（JC538） - TRANSFER CASE (4WD) 41-67

9 . Fill up the transfer case lubricating oil.
(a) Screw out the drain bolt and fill up the transfer
case lubricating oil.
Torque: 19 ~ 30N·m

CAUTION

• Required transfer case lubricant: Dexron
III, XT-2-QDX (Ford ESP-M2C138-CJ) or
equivalent.
• Filling volume: 1.2L.
• Don't mix the transfer case oil of different
brands.
• When checking the oil level, ensure the
vehicle is level and the oil level is no lower
than 5mm from the bottom of the filler
plug.

10 . Install front and rear transmission shaft. (Refer to "Chapter 34. Axle &
transmission shaft - transmission shaft, replacement")

41