Page 1922 - Workshop Manual - Tunland (2017)

42-20 TRANSMISSION - CLUTCH MODULE

5 . Remove the clutch cover.
(a) Align the mark on the clutch cover to that on
the flywheel and label them accordingly.
(b) Unscrew each bolt round by round, in a
diagonal manner, until the clutch diaphragm
spring is fully released. Unscrew all 12 bolts.

ftwx421001

(c) Remove the clutch cover.
CAUTION
Don't drop the clutch lining.

6 . Remove the clutch lining.
CAUTION
When the lining is removed, keep it away from
oil and dirt.

42

7 . Check the clutch lining assembly.
(a) Measure the rivet head depth and lining wear
with vernier calipers. Replace the lining if
needed.
Limit: 2.0mm