Page 212 - Workshop Manual - Tunland (2017)

04-74 DIAGNOSTICS - SRS SYSTEM

Diagnostic steps

1 . Check preloading assembly, driver’s seat belt (SRS control module-preloading

assembly, driver’s seat belt)
(a) Turn off the ignition switch, and disconnect the negative pole of the battery for more
than 90 seconds.
04
(b) Disconnect preloading assembly connector
D002, driver’s seat belt.

(c) Disconnect SRS control module connector
C016.
(d) Connect the negative pole of the battery and
turn on ignition switch to “ON”.

(e) Check preloading assembly connector D002,
driver’s seat belt.
Standard voltage

Multimeter connection Standard value

D002(1) ground
0V
D002(2) ground

Check whether the result is normal?