Page 276 - Workshop Manual - Tunland (2017)

04-138 DIAGNOSTICS - POWER WINDOW

BASIC INSPECTION

Steps Inspection contents Measures
Check Battery voltage Yes No> go to step 2

• Battery voltage shall not be lower Charge or replace the battery.
1
04 than 12V. No? Refer to “Chapter 20, start and
Check whether the result is normal? charge--battery”

Check the glass lifter of left front door Yes No> go to step 3

• Ignition Switch: ON.
• Use overall control switch of the
2 door to operate the up and down
of the lifter at left front door at No? Go to defect phenomenon form
gear1.
Check whether the result is normal?

Check the automobile lowering func- Yes No> go to step 4
tions for left front door glass
3 • Ignition Switch: ON.
• Ignition Switch: ON. No? Go to defect phenomenon form
Check whether the result is normal?

Check glass lifter of left front door Yes No> go to step 5
• Use overall control switch of the
door to operate the up and down
of the glass lifter at left front door
4 at gear 1.
No? Go to defect phenomenon form
Use overall control switch of the door
to operate the up and down of the
glass lifter at left front door at gear
1.

Check glass lifter of left front door Yes No> go to step 6
• Use overall control switch of the
door to operate the up and down
5
of the glass lifter at left front door No? Go to defect phenomenon form
at gear1.
Check whether the result is normal?

Check function of automobile window Yes No> go to step 7
close

• Ignition Switch: OFF.
• Close all the doors of the vehicle.
6 • Lock the door, and the power win-
dow will close automatically in the No? Go to defect phenomenon form
order of left to right after 2 sec-
onds.
Check whether the result is normal?