Page 33 - Workshop Manual - Tunland (2017)

INTRODUCTION - HOW TO TROUBLESHOOT 01-27

(b) Precaution on Connector Operation 01
• When removing a connector with
buckle, slightly press the connector
along the interface, gently press the
clip and open the buckle.
• When removing the connector, hold it
without stretching the harness.
• When connecting the connector, check
for distortion, damage or missing pin
in the connector.
• When connecting the connector with
buckle, ensure you hear the click,
which means it is firmly secured.
• When checking the connector with
multimeter, use mini probe at the back
of the connector (one side of the
harness).
CAUTION

• Since no back check is available to
waterproof connector, check it after
connecting a supplementary harness.
• When moving the probe, be careful not to
damage the connector pin. Key Points on
Connector Check

(c) Key Points on Connector Check
When connecting the connector, check:
• Hold the connector. Check the inserting
and locking situations (connected).

When disconnecting the connector,
check:
• Gently pull the harness and check for
missing or bent pin or broken central
harness.
• Visually check for rust, metal fragment,
water and bent or rusty pin, impurities
or distortion in the connector.