Page 395 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - WIPER & WASHER 04-257

(c) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)

A007
Multimeter connection Standard value
04
A 007 (4) - ground ＜ 2 Ω

ftwxd041362

Check whether the result is normal?
Yes> go to next step.
No > Maintain or replace the harness

3 . Check the harness and connectors (wiper and washer switch - ground)
(a) Ignition Switch: OFF.

(b) Disconnect the connector C012 of
combination switch (wiper).

ftwx641020

(c) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)

C012 Multimeter connection Standard value
C012 (3) - ground ＜ 2 Ω

ftwxd041363