Page 541 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - LIGHTING SYSTEM 04-403

Check whether the result is normal?

Yes> go to step 7
No > Replace the rear fog lamp switch.

7 . Check the harness and connectors (rear fog lamp switch - ground)
(a) Ignition Switch: OFF. 04

(b) Disconnect the combination switch connector
C008.

ftwx641019

(c) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)

C008
Multimeter connection Standard value
C008（19） - ground ＜ 2 Ω

ftwxd041390

Check whether the result is normal?

Yes> go to step 8
No > Maintenance or replace harness.

8 . Check the harness and connectors (rear fog lamp switch - BCM control unit)

(a) Ignition Switch: OFF.