Page 538 - Workshop Manual - Tunland (2017)
P. 538
04-400 DIAGNOSTICS - LIGHTING SYSTEM
(b) Disconnect connector C033 , BCM control
unit.
04
ftwxd041027
(c) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)
C034
1 2 3 4 5 Multimeter connection Standard value
6 7 8 9 10 11 12
F6(20A)-C034（C5） ＜ 2 Ω
F37 10A
F36 15A F19 F21 F18 F20 F22 F23
R07
20A 25A 5A
F11 F12 F13 F14 F15 F16 F17
ALT
15A 10A 15A 7.5A 20A 20A 7.5A 20A 10A 5A
B+ F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
ftwxd041007
Check whether the result is normal?
Yes> go to step 4
No > Maintenance or replace harness.
4 . Check the harness and connector (BCM control unit - rear fog lamp)
(a) Ignition Switch: OFF.
(b) Disconnect the connector C034 of BCM
control unit.
ftwxd041027
